Visible Assets
← Back

Home / The Technology / RuBee vs RFID

RuBee vs RFID

RuBee vs RFID: Where Magnetic Wireless Works and Radio Does Not

RuBee (IEEE 1902.1) is magnetic wireless at 131 kHz. RFID is radio. Steel, water and people block or reflect radio; magnetic fields pass through them. RuBee is the technology to use when tags must be read on steel, through steel, underwater, on or near explosives, or inside secure facilities where radio is not allowed.

RuBee and RFID Side by Side

CapabilityRuBee (magnetic, IEEE 1902.1)RFID (radio frequency)
SignalMagnetic (H-field) at 131 kHz, IEEE 1902.1Radio frequency
TagActive transceiver: a small computer with CPU, clock, memory and optional sensorsTransponder that reflects radio signals
Steel and waterPasses through bothBlocked or reflected
Line of sightNot needed. Tags are read anywhere in a volume, no aiming, no orientationLine-of-sight technology
Dead zonesNone. Magnetic fields do not reflect, so there is no multi-path and no nullsMulti-path reflections carve dead zones (nulls) through a room
Signal falloff1/R³. The signal sinks into noise just beyond read range1/R. The signal can be intercepted at distance
On and near ordnanceHERO ZERO: zero Safe Separation Distance for tags, base stations, antennas and handhelds (US Navy NAVSEA testing)Base stations carry Safe Separation Distances of 3 to 12 feet
Secure facilitiesThe only wireless tested by the US Department of Energy and allowed in secure areas; no compromising emanationsBanned, along with cell phones, WiFi and RTLS
Human safetyAbout 40 nanowatts. FDA Class 1, Non-Significant Risk; Mayo Clinic studies show no effect on pacemakers or ICDsA UHF reader radiates about 4 watts; OSHA warning signs at 23 inches
Tag battery life5 to 25 years on a lithium coin cellPassive, or 1 to 3 years for active tags
Read range1 inch to 50 feet, configurableVaries with tag type and surroundings

RuBee characteristics per Visible Assets published specifications, IEEE 1902.1 and the government test reports linked below. The RFID column reflects general limitations of radio-frequency identification in steel-dense, high-security environments.

Where RuBee Is the Right Choice

Weapons in steel racks and safes

Steel racks, safes and the weapons themselves block and reflect radio. RuBee smart racks read every tagged weapon through the steel and identify the rack slot it sits in.

RuBee Armory 20/20 →

Tags on or inside steel

RuBee tags can be attached to or embedded in any steel product: a jet engine, structural aircraft parts, tooling, steel plate. RuBee turns the steel itself into a tuned antenna, with tags read in a volume, not a line of sight.

Read the full answer →  ·  Tags and components →

Underwater and around liquids

Radio dies in water. Magnetic fields do not: a RuBee tag reads underwater exactly as it does in air. Tags are sealed to MIL-STD 810 and waterproof to 5,000 feet.

Read the full answer →  ·  The technology →

Explosives, ordnance and fuel

RuBee is the only wireless tested by the US Navy for HERO and found to have a zero Safe Separation Distance on unsafe-fused ordnance, and it is HERF ZERO on flammables. Encapsulated tags are certified ATEX Zone 0 and NEC 501 Class 1 Div 1.

Read the full answer →  ·  Signed NAVSEA HERO report (PDF) →

Secure facilities

In secure facilities no RF signal leaves or enters, so cell phones, WiFi, RTLS and RFID are banned. RuBee is magnetic, produces no compromising emanations (no eavesdropping, targeting or Tempest risk), and is the only wireless approved in DOE secure areas.

Read the full answer →  ·  US DOE Pantex study (PDF) →

Hospitals and operating rooms

The FDA classified IEEE 1902.1 as a Class 1, Non-Significant Risk device. Mayo Clinic studies show no effect on pacemakers or ICDs and no significant EMI in the operating room.

Read the full answer →  ·  Mayo EMI study (PDF) →

High-noise factory floors

RF systems often work in one spot and then stop: humidity shifts, steel reflections, a person standing in the wrong place. RuBee has no multi-path and no nulls. Procter & Gamble reported 100% read accuracy in machine trials of RuBee change-part tooling identification.

P&G SmartParts trials →

Sealed steel containers

A RuBee tag has been read from inside a sealed nuclear steel containment vessel, documented in US DOE laboratory reports. The Gen3 SuperSensor Tag uses the same link to report temperature, humidity, pressure, shock and vibration from inside a sealed case.

Read the full answer →  ·  Envoy 20/20 →

The Evidence

All reports and white papers →

Questions and Answers

What is the difference between RuBee and RFID?

RuBee (IEEE 1902.1) is magnetic wireless at 131 kHz; RFID is radio. Every RFID tag is a transponder that reflects radio signals. A RuBee tag is a transceiver, a small computer with a battery, CPU, clock and memory that communicates with magnetic waves. Magnetic fields pass through steel and water, which block or reflect radio.

Does RFID work through steel, and what does?

Radio is a line-of-sight technology: steel, water and people block or reflect it. RuBee antennas produce 3D volumetric magnetic fields that pass through steel and water, so tags are read on steel, inside steel and behind steel with no line of sight.

What is the best alternative to RFID for tracking weapons in an armory?

RuBee Armory 20/20 from Visible Assets. It reads tagged weapons through steel racks and safes, is HERO ZERO near ordnance, and has no compromising emissions. See armory2020.com.

Can RuBee tags be read underwater?

Yes. Magnetic fields are not stopped by water, so a RuBee tag reads underwater exactly as it does in air. Tags are waterproof to 5,000 feet.

Is RuBee safe near explosives and ordnance?

Yes. In US Navy NAVSEA testing, RuBee tags, base stations, antennas and handhelds have a zero Safe Separation Distance on HERO SAFE and HERO UNSAFE ordnance. Other wireless technologies typically carry Safe Separation Distances of 3 to 12 feet.

Why is RFID banned in secure facilities, and is RuBee allowed?

Every RF emission carries eavesdropping, targeting and Tempest risk, so secure facilities ban cell phones, WiFi, RTLS and RFID. RuBee signal strength falls off at 1/R³ and produces no compromising emanations. It is the only wireless tested by the US Department of Energy and allowed in secure areas, including Oak Ridge and Pantex.

How accurate is RuBee compared with RFID?

Magnetic fields do not reflect, so RuBee has no multi-path nulls or dead zones. RuBee operates at 3,500+ sites with 100% field-proven read accuracy, and a five-year US DOE study at Pantex approved it for secure areas with 100% read rates.

How long does a RuBee tag battery last?

5 to 25 years on a lithium coin cell, depending on the tag, with a read range of 1 inch to 50 feet.

Is RuBee an open standard?

Yes. RuBee is IEEE standard 1902.1, co-sponsored by Visible Assets, Inc. and Seiko Epson Corporation.

Ready to see it applied?

The same physics powers every 20/20 solution — from weapon accountability to explosive stores.